| jef aldjfio efoiada |
Manners Composite Stocks
The True Choice of Champions
The True Choice of Champions
| jef aldjfio efoiada |
| A lot of work went into developing our tactical series stocks. They were designed with one ultimate goal in mind, ruggedness, stability, accuracy, and ergonomics. These stocks are engineered for the correct stiffness to weight ratio using state of the art processes during manufacturing. The outer shells are made with 35% aircraft grade carbon fiber and 65% fiber glass in multiple layers. They are hand laid with high temperature epoxy resins, placed under a vacuum, and heat cured to obtain the perfect resin to fabric weight ratio. Standard configuration stocks come full inletted with a pillar set that is ready to install at time of bedding. All of our tactical stocks come standard, painted with an industrial grade very durable, polyurethane enamel paint which is impervious to most gun cleaning solvents. It is offered in 5 different colors, black, od green, coyote tan, dessert tan, and sand. We also offer the option of many different camo patterns that can be found on our colors and finishes page . |
| MCS-GAT |
| MCS-GAT This is a thumbhole tactical stock. This stock was a joint effort by MCS and GA Precision, to design a small light weight thumbhole tactical stock. The standard weight is 3.5 lbs but can be had as light as 2.8 lbs when ordered with the 90% shell option. The MCS-GAT is a ambidextrous stock with a small swell on both stocks. The forend is 1.75 wide at the tip and rounded to a beaver tail that is flat. The forend is also wide enough to accept a #7 barrel which is about 1.125" diameter at the tip of the stock. It comes standard with a high cheekpiece and an adjustable spacer type butt system, with a 1/2" Pachmyer Decel pad. It also has a butt hook that can be used to ride the bags or control your rifle with your non-trigger hand. Rem 700 s/a is the standard inlet but others can be special ordered. |
| MCS-T |
| MCS-T1 |
| MCS-T1 The standard weight is 3.4 lbs. But can be had as light as 2.4 lbs., and as heavy as 5 lbs. The forend is 1.78” wide at the tip and will take barrels up to 1.350 inches in diameter. It comes standard with a high cheekpiece and an adjustable spacer type butt system, with a 1/2" Pachmyer Decel pad. It also has a butt hook that can be used to ride the bags or control the rifle with your non-trigger hand. Rem 700 s/a is the standard inlet but others can be special ordered. |
| MCS-T50 Tactical 50bmg |
| MCS-T50 This is our new 50bmg thumbhole tactical stock. This stock was designed for the new 1000 yard FCSA prone class. It features a fully adjustable 3 way but pad system and a 2 way cheekpiece system. The cheekpiece is designed for quick removal for cleaning, but at the same time giving the bolt plenty of clearance to operate. The barrel, action, magazine, and trigger areas are molded into the shell of the stock. The only cuts in the shell are the bolt handle and pillar holes done during the bedding process. The forend is longer than most 50bmg stocks for more stability, but not too long to affect the amount of swing on a moving target. The standard weight is 5.5 lbs but can be had as light as 4.5 lbs. The MCS-T50 comes in right hand only, with a small swell on the left side for your thumb. The forend is 2.9" wide at the tip and has straight vertical sides and a flat bottom. It also has a butt hook that can be used to ride the bags or controlling your rifle with your non-trigger hand. The standard inlet is the Mcbros 50 BMG action in single shot, repeater, RP, and LP, but others can be special ordered. |
| jkljklajdfklajdfklajlk;fadf |
| Tactical |
| MCS-T2 |
| .MCS-T2A AND T2 This stock comes in two versions the T2A which has an adjustable cheek and the T2 that is non adjustable. The T2A comes standard with an adjustable cheek and Terry Cross's hardware. Both come standard with a fixed 1" Pachmyer Decel pad. It can also be ordered with the optional butt spacer system and a Decel pad .The standard weight for the T2A is 3.9 lbs. And the T2 is 2.6 lbs. The forend is 2.40” wide at the tip and will take barrels up to 1.350 inches in diameter. A lot of work went into the design of the back of the stock. It has a flat that is about 3/4" wide on the bottom with true running sides. This allows the stock to ride very straight and true when using a rear bag. |
| .MCS-T4A AND T4 The MCS-T4 comes in two versions the T4A which has an adjustable cheek and the T4 with is non adjustable. The T4A comes standard with an adjustable cheek and Terry Cross's hardware. Both come standard with a fixed 1" Pachmyer Decel pad. They can also be ordered with the optional butt spacer system and a 1/2" Decel pad .The standard weight for the T4A is 4.2 lbs. And the T4 is 2.8 lbs. The forend is about 2.50” wide and will take barrels up to 1.350 inches in diameter. The sides and bottom of the forend and the bottom of the butt behind the hook are parallel with the bore. This allows the stock to ride very straight and true if you want to use bags. The forend of the stock is only textured on the back half and we lengthened the pistol grip about 1/4" longer compared to the T2 stock. |
| 8 Models Available - MCS-T - MCS-T1 - MCS-T2 - MCS-T3 - MCS-T4 - MCS-T5 - MCS-GAT - MCS-T50 |
| MCS-T3 |
| MCS-T3 This is one of our new designs. It is a good all around hunting / tactical stock. The standard weight is 2.6 lbs but can be had as light as 2.2 Lbs. The forend is 2.40” wide at the tip and will take straight taper barrels up to 1.350 inches in diameter.. The MCS-T3 comes standard with a 1" Pachmyer Decel pad installed at a length of pull at 13.5". This stock has a high cheekpiece and a nice palm swell, and a little longer grip than the MCS-T stock. The forend and palm swell feature a light molded in texture. |
| Manners Composite Stocks L.L.C 1209 Swift North Kansas City, Mo. 64116 Email: mannersstocks@yahoo.com / TMANNERS@msn.com Phone:(816) 283-3334 fax (816) 283-7244 |
| MCS-TA and T This is our more traditional hunting / tactical stock. It comes in two different versions the MCS-T fixed cheek version and the MCS-TA adjustable cheek version with Terry Cross hardware. The standard weight of the fixed cheek version is 2.5 lbs but with the 90% carbon fiber option it usually ends up around 2.1 lbs. The standard weight of the adjustable cheek version is 3.4 lbs. The forend is 1.75 wide at the tip and rounded to a beaver tail that is flat. The forend is also wide enough to accept a #8 barrel which is about 1.125" diameter at the tip of the stock. The MCS-T and TA comes standard with a 1" Pachmyer Decel pad installed at a length of pull at 13.5". This stock has a high cheekpiece and a nice palm swell. The forend and palm swell feature a molded in textured surface for a sure grip. Rem 700 s/a is the standard inlet but others can be special ordered. |
| MCS-T4 |
| MCS-T5 |
| MCS-T5A AND T5 The MCS-T5A stock is offered in two version a T5 non adjustable cheek and the T5A with a adjustable cheek and KMW hardware. The T5A version is designed as a right hand grip, with a small thumb rest on the left side of the stock. The T5 non adjustable cheek version has a ambidextrous grip. Although the T5A version is a right hand stock, we designed it so that if have to shoot with your weak hand it stills feels good. A lot of time went into the design of the grip on this stock, it moves your hand down and forward so your trigger finger is in a more natural position and you are not having to reach for the trigger. The area behind the trigger looks odd but it is designed to make your hand return to the same spot each time you grip the stock. It works very well with all sizes of hands, small or large. Both versions come standard with a fixed 1" Pachmyer Decel pad. It can also be ordered with the optional butt spacer system and a 1/2" Decel pad .The standard weight for the T5A is 4.0 lbs. And the T5 is 2.7 lbs. The forend is 2.40” wide at the tip and will take barrels up to 1.350 inches in diameter. The very top end of the forend is designed with a slight flare to accept the Badger EFR night vision mount. It also has a butt hook that can be used to ride the bags or control your rifle with your non-trigger hand. Rem 700 s/a is the standard inlet but others can be special ordered. |
