Thank you again for all your support. Thomas Manners

When combined with one of our bulletproof stocks we consider this a true bolt in and go system. The sturdy aluminum chassis with its self-centering bedding system is designed to support the action with 5 different contact points.This is done to compensate for the slight variances found from action to action. When installed you will have a repeatable bedding system that supports a fully floated barrel for maximum accuracy. The MCS-BDL mini chassis will work with all Remington based 700 short action foot print actions with a factory or custom recoil lug with a thickness up to .375”. The weight of the system is only 6.5 ounces. This can be installed in all of our Remington based stocks. When combined with one of our new Elite Hunter Stocks, like the one pictured below, you get a truly rock solid lightweight stock.

The Stock below is an MCS-EH4 with an MCS-BDL mini chassis installed, total weight is less than 2 lb., coming in at only 30.8 ounces. In the coming weeks this will also be available for long and medium length 700 based actions. If you are at the Shot Show this year stop by our booth ( #20440 ) and take a look. Thank you very much.

Our booth is no. 20440.

WIN! ‘Like’ our Facebook Page and win brand new MCS-T6A in new color.

This is a blank stock that we will inlet to any of the actions that we do after the winning is picked. It will also come with Studs and cups!!

Two new colors are being introduced, in the image on the right you see them on T6A (top) and T (bottom).

The standard weight for the T6A is 4.0 lbs. And the T6 is 2.9 lbs. The forend is about 1.97” wide and will take barrels up to 1.300 inches in diameter.

Fully ambidextrous grip and cheek The forend is on the more narrow side with a flat bottom and a width of 1.97”. While the sides of the forend are parallel to the bore, the bottom has a taper, which allows for small elevation adjustments by pushing or pulling the rifle when using a front bag or other surface.
The very top 3.5” from the tip of the forend has a slight flare to accommodate the installation of an imbedded front rail for night vision. The vertical pistol grip is designed with a small palm swell on each side for the average size shooter, but is also lengthened about a ¼” to help accommodate larger hands that have trouble keeping all their fingers on the grip without their little finger falling off the bottom of the grip like on other tactical style stocks. It will take up to a 1.30 straight barrel channel It will come standard with a full inlet, your choice of a solid painted finish or one of our molded in camo finishes, a fixed 1″ decel pad and a set of 9/16″ pillars. The T6/A can be inletted for both right and left hand actions. It will also accommodate all Remington style, Winchester style and savage actions. call for more details.

Subject: T-3 Stock

Recently received my new Manner’s T3 stock and frankly couldn’t have been more pleased.  I appreciate Matt’s exceptional customer support, patience with my questions and informative answer.

He wasn’t trying to sell me just any stock but the one that was best suited for my intended purpose.  Fortunately the best stock for me was available to ship.

The stock shipped the next day and tracking information provided shortly after.  Stock was packed to avoid any damage during shipping and arrived safety.

My gunsmith was very impressed.  With the exception of the glass and pillar bedding, he expects the Rem 700 SA will drop right in with no need for additional fitting.

This experience has me planning on another rifle build so I can pick up a T-5 next.