|Special Option||Right Handed|
|Action||REMINGTON 700 LA|
|Trigger Guard||SURGEON DBM SYSTEM|
|Barrel||REMINGTON FACTORY SENDERO/VARMINT|
|Pad||ADJ BUTT SPACERS 1 INCH|
|Hardware||3 Studs (2 Front, 1 Rear)|
About MCS-T2The standard weight is 3.4 lbs. But can be had as light as 2.4 lbs., and as heavy as 5 lbs. The forend is 1.78” wide at the tip and will take barrels up to 1.350 inches in diameter. It comes standard with a high cheek piece and an adjustable spacer type butt system, with a 1/2″ Pachmyer Decelerator pad. It also has a butt hook that can be used to ride the bags or control the rifle with your non-trigger hand. Rem 700 s/a is the tandard inlet but others can be special ordered. The MCS-T1 was designed around a Rem 700 style action, but can be had for Winchester, Savage, Howa and other actions. For a complete list please check out the order online/stock builder, or call for more details
- A. Stock Overall Length
- B. LOP - Length of Pull
- C. Drop of Comb from Center Bore
- D. Drop of Heel from Center Bore
- E. Forarm Width
|OVERALL STOCK LENGTH @ STD LOP||MAX BARREL SIZE||FOREARM |
|MAX LOP WITH 1" PAD||DROP OF COMB FROM CENTER OF BORE||DROP OF PAD FROM CENTER OF BORE||EST WEIGHT STD SHELL||EST WEIGHT ELITE SHELL|
|MCS-TA||31.75||8||1.75||13.75||adj||1.27||3.4 lbs||2.8 lbs|
|MCS-T1||31.75||1.35 st||1.78||adj-std||0.36||0.36||3.4 lbs||2.7 lbs|
|MCS-GAT||32||7/m24||1.75||adj-std||0.35||0.35||3.5 lbs||2.8 lbs|
|MCS-T2||32||1.35 st||2.4||13.75||0.5||0.5||2.6 lbs||2.1 lbs|
|MCS-T2A||32||1.35 st||2.4||13.75||adj||0.5||3.9 lbs||3.3 lbs|
|MCS-T3||31.75||1.35 st||2.4||13.75||0.38||1.27||2.6 lbs||2.1 lbs|
|MCS-T4||32||1.35 st||2.5||14||0.45||0.45||2.8 lbs||2.2 lbs|
|MCS-T4A||32||1.35 st||2.5||14||adj||0.45||4.1 lbs||3.4 lbs|
|MCS-T5||32||1.35 st||2.4||13.75||0.6||0.6||2.7 lbs||2.2 lbs|
|MCS-T5A||32||1.35 st||2.4||13.75||adj||0.6||3.8 lbs||3.1 lbs|
|MCS-T6||32||1.30 st||1.97||13.75||0.45||0.45||2.7 lbs||2.1 lbs|
|MCS-T6A||32||1.30 st||1.97||13.75||adj||0.45||4.0 lbs||3.3 lbs|
|MCS-TF1||31.75||1.30 st||1.97||13.75||0.45||0.45||3.7 lbs||2.6 lbs|
|MCS-TF1A||31.75||1.30 st||1.97||13.75||adj||0.45||4.9 lbs||3.8 lbs|
|MCS-TF2||31.75||1.30 st||1.97||13.75||0.45||0.45||3.7 lbs||2.7 lbs|
|MCS-TF2A||31.75||1.30 st||1.97||13.75||adj||0.45||4.9 lbs||3.8 lbs|
|MCS-TF3||32||1.35 st||2.5||13.75||0.45||0.45||3.7 lbs||2.7 lbs|
|MCS-TF3A||32||1.35 st||2.5||13.75||adj||0.45||4.9 lbs||3.8 lbs|
|MCS-TF4||32||1.35 st||2.5||13.75||0.45||0.45||3.7 lbs||2.7 lbs|
|MCS-TF4A||32||1.35 st||2.5||13.75||adj||0.45||5.0 lbs||3.8 lbs|
Overall stock length @ Std LOP - This is the measurment from the tip of the forend to the tip of the butt pad. This measurerment will change depending on what length of pull the pad is set at.
Max barrel size - This is the Maxiumum size of barrel that will fit into the stock and still have clearance. On the hunting style stocks there is also a few other factors that determine if your barrel will fit. Action length ( short/long ) along with the diameter and the installed length of the straight shank. The straight shank is measured from the face of the action to where the tapper starts.
Forearm width - Average measured width of forend.
Max LOP with 1" pad - This is the Maxiumum length of pull that can be ordered with a 1" pad before having to add a adjustable butt spacer system. LOP is measured from the face of the trigger to the tip of the butt pad.
Drop of comb from center of bore - This is the distance from the center of the bore ( based on Remington action ) to the top of the cheek/comb.
Drop of pad from center of bore - This is the distanced from the center of the bore ( based on Remington action ) to the top edge of the pad/heel.
Est weight of STD and Elite Shell - This is the estimated weight of the stock with a full inlet and standard recoil pad. This may vary due to type of inlet and the amount of hardware ( cups, rails, adj, butt, studs ect. ) added to the build.