|Special Option||Right Handed|
|Action||REMINGTON 700 SA|
|Barrel||REMINGTON FACTORY SENDERO/VARMINT|
|Pad||1 INCH PAD|
|Hardware||3 STUDS, PILLARS INSTALLED|
This stock has became very popular as a very good long-range hunting / tactical stock. The standard weight is 2.6 lbs but can be had as light as 2.2 Lbs.
The forend is 2.40” wide at the tip and will take up to a straight taper barrel of 1.350 inches in diameter. The MCS-T3 comes standard with a 1″ Pachmyer Decel pad installed at a length of pull at 13.5″.
This stock has a high cheekpiece for the bigger bell scopes and a nice palm swell. The forend and palm swell feature a molded in textured surface for a sure grip. The MCS-T3 was designed around an Rem 700 style action, but can be had for Winchester, Savage, Howa and other actions. Please call for more details.
- A. Stock Overall Length
- B. LOP - Length of Pull
- C. Drop of Comb from Center Bore
- D. Drop of Heel from Center Bore
- E. Forarm Width
|OVERALL STOCK LENGTH @ STD LOP||MAX BARREL SIZE||FOREARM |
|MAX LOP WITH 1" PAD||DROP OF COMB FROM CENTER OF BORE||DROP OF PAD FROM CENTER OF BORE||EST WEIGHT STD SHELL||EST WEIGHT ELITE SHELL|
|MCS-TA||31.75||8||1.75||13.75||adj||1.27||3.4 lbs||2.8 lbs|
|MCS-T1||31.75||1.35 st||1.78||adj-std||0.36||0.36||3.4 lbs||2.7 lbs|
|MCS-GAT||32||7/m24||1.75||adj-std||0.35||0.35||3.5 lbs||2.8 lbs|
|MCS-T2||32||1.35 st||2.4||13.75||0.5||0.5||2.6 lbs||2.1 lbs|
|MCS-T2A||32||1.35 st||2.4||13.75||adj||0.5||3.9 lbs||3.3 lbs|
|MCS-T3||31.75||1.35 st||2.4||13.75||0.38||1.27||2.6 lbs||2.1 lbs|
|MCS-T4||32||1.35 st||2.5||14||0.45||0.45||2.8 lbs||2.2 lbs|
|MCS-T4A||32||1.35 st||2.5||14||adj||0.45||4.1 lbs||3.4 lbs|
|MCS-T5||32||1.35 st||2.4||13.75||0.6||0.6||2.7 lbs||2.2 lbs|
|MCS-T5A||32||1.35 st||2.4||13.75||adj||0.6||3.8 lbs||3.1 lbs|
|MCS-T6||32||1.30 st||1.97||13.75||0.45||0.45||2.7 lbs||2.1 lbs|
|MCS-T6A||32||1.30 st||1.97||13.75||adj||0.45||4.0 lbs||3.3 lbs|
|MCS-TF1||31.75||1.30 st||1.97||13.75||0.45||0.45||3.7 lbs||2.6 lbs|
|MCS-TF1A||31.75||1.30 st||1.97||13.75||adj||0.45||4.9 lbs||3.8 lbs|
|MCS-TF2||31.75||1.30 st||1.97||13.75||0.45||0.45||3.7 lbs||2.7 lbs|
|MCS-TF2A||31.75||1.30 st||1.97||13.75||adj||0.45||4.9 lbs||3.8 lbs|
|MCS-TF3||32||1.35 st||2.5||13.75||0.45||0.45||3.7 lbs||2.7 lbs|
|MCS-TF3A||32||1.35 st||2.5||13.75||adj||0.45||4.9 lbs||3.8 lbs|
|MCS-TF4||32||1.35 st||2.5||13.75||0.45||0.45||3.7 lbs||2.7 lbs|
|MCS-TF4A||32||1.35 st||2.5||13.75||adj||0.45||5.0 lbs||3.8 lbs|
Overall stock length @ Std LOP - This is the measurment from the tip of the forend to the tip of the butt pad. This measurerment will change depending on what length of pull the pad is set at.
Max barrel size - This is the Maxiumum size of barrel that will fit into the stock and still have clearance. On the hunting style stocks there is also a few other factors that determine if your barrel will fit. Action length ( short/long ) along with the diameter and the installed length of the straight shank. The straight shank is measured from the face of the action to where the tapper starts.
Forearm width - Average measured width of forend.
Max LOP with 1" pad - This is the Maxiumum length of pull that can be ordered with a 1" pad before having to add a adjustable butt spacer system. LOP is measured from the face of the trigger to the tip of the butt pad.
Drop of comb from center of bore - This is the distance from the center of the bore ( based on Remington action ) to the top of the cheek/comb.
Drop of pad from center of bore - This is the distanced from the center of the bore ( based on Remington action ) to the top edge of the pad/heel.
Est weight of STD and Elite Shell - This is the estimated weight of the stock with a full inlet and standard recoil pad. This may vary due to type of inlet and the amount of hardware ( cups, rails, adj, butt, studs ect. ) added to the build.