Specifications
Additional Info
Stock Model | MCS-EH2 |
---|---|
SKU | 15925 |
Special Option | Right Handed |
Shell | ELITE HUNTER |
Action | BIG HORN LA STANDARD |
Action Manuf. | BIG HORN |
Trigger Guard | PTG BDL |
Barrel | OTHER BARREL CONTOUR |
Other Barrel | Bartlein #3 |
Pad | LIMB SAVER |
Hardware | 2 Studs, 2 non rotaoting cups left side |
Description
Details
About MCS-EH2
This stock was designed for the long-range hunter. Depending on the inlet, the standard weight with a ½” decel pad is 26 to 28 ounces. The forend is 1.75” wide at the tip and rounded to a beaver tail that is flat and wide enough to accept a #8 barrel which is about 1.125″ diameter at the tip of the stock. The grip on the stock is more of a vertical tactical style, that is longer than standard with a small palm swell and overall smaller grip than say our MCS-T4 stock. The bottom of the butt has a flat that is about ¾” wide that is true running with the sides of the stock. This allows it to ride very straight and true when using a rear bag. It is designed for Rem 700 style actions, but can be had for Winchester, Savage, Howa and other actions. * On a side note, this stock will cross over to our tactical side, and be offered with a standard shell/weight and be available in molded in colors/camo.Tech Specs
- A. Stock Overall Length
- B. LOP - Length of Pull
- C. Drop of Comb from Center Bore
- D. Drop of Heel from Center Bore
- E. Forarm Width
OVERALL STOCK LENGTH @ STD LOP | MAX BARREL SIZE | FOREARM WIDTH | MAX LOP WITH 1" PAD | DROP OF COMB FROM CENTER OF BORE | DROP OF PAD FROM CENTER OF BORE | EST WEIGHT STD SHELL | EST WEIGHT ELITE SHELL | |
---|---|---|---|---|---|---|---|---|
MCS-T | 31.75 | 8 | 1.75 | 13.75 | 0.38 | 1.27 | 2.5 lbs | 28oz |
MCS-TA | 31.75 | 8 | 1.75 | 13.75 | adj | 1.27 | 3.4 lbs | 2.8 lbs |
MCS-T1 | 31.75 | 1.35 st | 1.78 | adj-std | 0.36 | 0.36 | 3.4 lbs | 2.7 lbs |
MCS-GAT | 32 | 7/m24 | 1.75 | adj-std | 0.35 | 0.35 | 3.5 lbs | 2.8 lbs |
MCS-T2 | 32 | 1.35 st | 2.4 | 13.75 | 0.5 | 0.5 | 2.6 lbs | 2.1 lbs |
MCS-T2A | 32 | 1.35 st | 2.4 | 13.75 | adj | 0.5 | 3.9 lbs | 3.3 lbs |
MCS-T3 | 31.75 | 1.35 st | 2.4 | 13.75 | 0.38 | 1.27 | 2.6 lbs | 2.1 lbs |
MCS-T4 | 32 | 1.35 st | 2.5 | 14 | 0.45 | 0.45 | 2.8 lbs | 2.2 lbs |
MCS-T4A | 32 | 1.35 st | 2.5 | 14 | adj | 0.45 | 4.1 lbs | 3.4 lbs |
MCS-T5 | 32 | 1.35 st | 2.4 | 13.75 | 0.6 | 0.6 | 2.7 lbs | 2.2 lbs |
MCS-T5A | 32 | 1.35 st | 2.4 | 13.75 | adj | 0.6 | 3.8 lbs | 3.1 lbs |
MCS-T6 | 32 | 1.30 st | 1.97 | 13.75 | 0.45 | 0.45 | 2.7 lbs | 2.1 lbs |
MCS-T6A | 32 | 1.30 st | 1.97 | 13.75 | adj | 0.45 | 4.0 lbs | 3.3 lbs |
MCS-TF1 | 31.75 | 1.30 st | 1.97 | 13.75 | 0.45 | 0.45 | 3.7 lbs | 2.6 lbs |
MCS-TF1A | 31.75 | 1.30 st | 1.97 | 13.75 | adj | 0.45 | 4.9 lbs | 3.8 lbs |
MCS-TF2 | 31.75 | 1.30 st | 1.97 | 13.75 | 0.45 | 0.45 | 3.7 lbs | 2.7 lbs |
MCS-TF2A | 31.75 | 1.30 st | 1.97 | 13.75 | adj | 0.45 | 4.9 lbs | 3.8 lbs |
MCS-TF3 | 32 | 1.35 st | 2.5 | 13.75 | 0.45 | 0.45 | 3.7 lbs | 2.7 lbs |
MCS-TF3A | 32 | 1.35 st | 2.5 | 13.75 | adj | 0.45 | 4.9 lbs | 3.8 lbs |
MCS-TF4 | 32 | 1.35 st | 2.5 | 13.75 | 0.45 | 0.45 | 3.7 lbs | 2.7 lbs |
MCS-TF4A | 32 | 1.35 st | 2.5 | 13.75 | adj | 0.45 | 5.0 lbs | 3.8 lbs |
MCS-EH1 | 32 | 7/m24 | 1.75 | 14.1 | 0.35 | 0.35 | - | 28oz |
MCS-EH2 | 31.5 | 4 | 1.5 | 14.1 | 0.4 | 1.29 | - | 27oz |
MCS-EH3 | 31.75 | 4 | 1.5 | 14.1 | 0.4 | 0.78 | - | 27oz |
MCS-EH4 | 29 | 5.5 | 1.4 | 14.1 | 0.38 | 1.27 | - | 26oz |
MCS-EHT | 31 | 4 | 1.4 | 14.1 | 0.65 | 0.65 | - | 26oz |
MCS-SL | 31.5 | 4 | 1.5 | 13.75 | 0.45 | 0.76 | - | 27oz |
Overall stock length @ Std LOP - This is the measurment from the tip of the forend to the tip of the butt pad. This measurerment will change depending on what length of pull the pad is set at.
Max barrel size - This is the Maxiumum size of barrel that will fit into the stock and still have clearance. On the hunting style stocks there is also a few other factors that determine if your barrel will fit. Action length ( short/long ) along with the diameter and the installed length of the straight shank. The straight shank is measured from the face of the action to where the tapper starts.
Forearm width - Average measured width of forend.
Max LOP with 1" pad - This is the Maxiumum length of pull that can be ordered with a 1" pad before having to add a adjustable butt spacer system. LOP is measured from the face of the trigger to the tip of the butt pad.
Drop of comb from center of bore - This is the distance from the center of the bore ( based on Remington action ) to the top of the cheek/comb.
Drop of pad from center of bore - This is the distanced from the center of the bore ( based on Remington action ) to the top edge of the pad/heel.
Est weight of STD and Elite Shell - This is the estimated weight of the stock with a full inlet and standard recoil pad. This may vary due to type of inlet and the amount of hardware ( cups, rails, adj, butt, studs ect. ) added to the build.