» TECHNICAL SPECIFICATIONS

Stock Technical Specification
  1. Stock Overall Length
  2. LOP – Length of Pull
  3. Drop of Comb from Center Bore
  4. Drop of Heel from Center Bore
  5. Forarm Width

Specifications:

STOCK MODEL
OVERALL STOCK LENGTH @ STD LOP
MAX BARREL SIZE
FOREARM WIDTH
MAX LOP WITH 1″ PAD
DROP OF COMB FROM CENTER OF BORE
DROP OF PAD FROM CENTER OF BORE
EST WEIGHT STD SHELL
EST WEIGHT ELITE SHELL
MCS-CS  24.75  M24  1.84  10.25-13.5 (1/2″ Pad  0.525  0.525  3.00  2.75
MCS-CS2  28.5  1.35″ str  2.4  10.25-13.5 (1/2″ Pad  0.525  0.525  3.35  2.97
MCS-PRS1  31.50  1.35″ str  2.0  13.75  adj  0.45  –  3.0 lbs
MCS-PRS2  31.50  1.35″ str  2.0  13.75  adj  0.45  –  3.0 lbs
MCS-T  31.75  7/M24  1.75  13.75  0.38  1.27  2.5 lbs  28oz
MCS-T2  32  1.35″ str  2.4  13.75  0.50  0.50  2.6 lbs  2.1 lbs
MCS-T3  31.75  1.35″ str  2.4  13.75  0.38  1.27  2.6 lbs  2.1 lbs
MCS-T4  32  1.35″ str  2.5  14  0.45  0.45  2.8 lbs  2.2 lbs
MCS-T5  32  1.35″ str  2.4  13.75  0.60  0.60  2.7 lbs  2.5 lbs
MCS-T5A  32  7  2.4  13.75  adj  0.60  3.8 lbs  3.1 lbs
MCS-EH1  32  7/M24  1.75  14.1  0.35  0.35  –  30 oz
MCS-EH2  31.5  Bartlein #4  1.5  13.75  0.40  1.29  –  27 oz
MCS-EH3  31.75  Bartlein #4  1.5  14.1  0.40  0.78  –  27 oz
MCS-EH4  29  Rem Sendero  1.4  14.1  0.38  1.27  –  26 oz
MCS-EH5  32  7  1.75  13.75  0.60  0.60  –  29 oz
MCS-EH5A  32  7  1.75  13.75  adj  0.60  –  3.0 lbs
MCS-EH6  31.75  3  1.44  14.1  0.40  0.78  –  28 oz
MCS-EH6A  31.75  Proof Light  1.55  14.1  adj  0.78  –  2.8 lbs
MCS-EH8  29  3  1.31  14.1  0.40  0.78  –  25 oz
MCS-EHF1  32  7/M24  1.75  14.1  .35  .35  –  2.4 lbs
MCS-EHF1A  32  7/M24  1.75  14.1  adj  .35  –  4.0 lbs
MCS-EHT  31  Bartlein #4  1.4  14.1  0.65  0.65  –  26 oz
MCS-EHTA  31  Bartlein #4  1.4  14.1  adj  0.65  –  3.0 lbs
MCS-EHSL  31.5  Bartlein #4  1.5  13.75  0.45  0.76  –  27 oz
MCS-FCLASS 1″ PAD  39.13  1.35″ str  2.99  14  adj  0.4  –  3.92 lbs
MCS-FCLASS MASTERCLASS ADJ BUTT  40.13  1.35″ str  2.99  16  adj  0.4  –  5.04 lbs
MCS-LRT 1″ PAD  38.75  2″ str  2.95  14  adj  0.5  –  4.58 lbs
MCS-LRT MASTERCLASS ADJ BUTT  39.75  2″ str  2.95  16  adj  0.5  –  5.7 lbs
Specification explanations:

Overall stock length @ Std LOP – This is the measurement from the tip of the forend to the tip of the butt pad. This measurement will change depending on what length of pull the pad is set at.

Max barrel size – This is the Maximum size of barrel that will fit into the stock and still have clearance. On the hunting style stocks there is also a few other factors that determine if your barrel will fit. Action length ( short/long ) along with the diameter and the installed length of the straight shank. The straight shank is measured from the face of the action to where the tapper starts.

Forearm width – Average measured width of forend.

Max LOP with 1″ pad – This is the Maximum length of pull that can be ordered with a 1″ pad before having to add a adjustable butt spacer system. LOP is measured from the face of the trigger to the tip of the butt pad.

Drop of comb from center of bore – This is the distance from the center of the bore ( based on Remington action ) to the top of the cheek/comb.

Drop of pad from center of bore – This is the distanced from the center of the bore ( based on Remington action ) to the top edge of the pad/heel.

Est weight of STD and Elite Shell – This is the estimated weight of the stock with a full inlet and standard recoil pad. This may vary due to type of inlet and the amount of hardware ( cups, rails, adj, butt, studs ect. ) added to the build.

* Folding Stocks fold to 22″

Check out more about stocks, including stock anatomy, here!