Tactical Stocks

A lot of work went into developing our tactical series stocks. They were designed with an ultimate goal in mind, ruggedness, stability, accuracy, and ergonomics. These stocks are engineered for the correct stiffness to weight ratio using state of the art processes during manufacturing.

The outer shells are made with 35% aircraft grade carbon fiber and 65% fiber glass in multiple layers. They are hand laid with high temperature epoxy resins, placed under a vacuum, and heat cured to obtain the perfect resin to fabric weight ratio. Standard configuration stocks come full inletted with a pillar set that is ready to install at time of bedding.

All of our tactical stocks come standard with a premuim painted finish in a solid color of your choice. We also offer most models in a molded in Field-grade gel coat finish. A complete list of finish options can be found on the Colors and Finishes page. ET-MidnightL

For 2014 we are introduce a new lay-up option for our tactical line of stocks, the Elite Tactical shell option. This is basically the same technology and 100% carbon fiber shell that comes standard in our Elite Hunter series of stocks, but with a bit of old school twist to it. This option is available in all our tactical stocks including the folders. Back when we started Manners Stocks, some of the first stocks that we produced were clear carbon fiber.

The Elite Tactical stocks will also come standard with our tough armor grip and textured clear finish over the top. Visit Elite Tactical page for more details.

MCS-T6A AND T6

MCS-T6A The MCS-T6 comes in two versions. The T6A which has an adjustable cheek and the T6 with is non-adjustable. The T6A comes standard with an adjustable cheek and KMW hardware. Both come standard with a fixed 1″ Pachmyer Decelerator pad. They can also be ordered with the optional Adj butt spacer system and a 1/2″ Pachmyer Decelerator pad . The standard weight for the T6A is 4.0 lbs. And the T6 is 2.9 lbs. The forend is about 1.97” wide and will take barrels up to 1.300 inches in diameter.

Fully ambidextrous grip and cheek The forend is on the more narrow side with a flat bottom and a width of 1.97”. While the sides of the forend are parallel to the bore, the bottom has a taper, which allows for small elevation adjustments by pushing or pulling the rifle when using a front bag or other surface.
The very top 3.5” from the tip of the forend has a slight flare to accommodate the installation of an imbedded front rail for night vision.

The vertical pistol grip is designed with a small palm swell on each side for the average size shooter, but is also lengthened about a ¼” to help accommodate larger hands that have trouble keeping all their fingers on the grip without their little finger falling off the bottom of the grip like on other tactical style stocks. It will take up to a 1.30 straight barrel channel It will come standard with a full inlet, your choice of a solid painted finish or one of our molded in camo finishes, a fixed 1″ decel pad and a set of 9/16″ pillars. The T6/A can be inletted for both right and left hand actions. It will also accommodate all Remington style, Winchester style and savage actions. call for more details.

MCS-T5A AND T5

MCS-T5The MCS-T5A stock is offered in two version a T5 non adjustable cheek and the T5A with a adjustable cheek and KMW hardware. The T5A version is designed as a right hand grip, with a small thumb rest on the left side of the stock. The T5 non adjustable cheek version has a ambidextrous grip. Although the T5A version is a right hand stock, we designed it so that if you have to shoot with your weak hand it stills feels good.

A lot of time went into the design of the grip on this stock, it moves your hand down and forward so your trigger finger is in a more natural position and you are not having to reach for the trigger. The area behind the trigger looks odd but it is designed to make your hand return to the same spot each time you grip the stock.MCS-T5A It works very well with all sizes of hands, small or large. Both versions come standard with a fixed 1″ Pachmyer Decelerator pad. It can also be ordered with the optional butt spacer system and a 1/2″ Decelerator pad .The standard weight for the T5A is 4.0 lbs. And the T5 is 2.7 lbs. The forend is 2.40” wide at the tip and will take barrels up to 1.350 inches in diameter.

The very top end of the forend is designed with a slight flare to accept the Badger Ordance EFR night vision mount. It also has a butt hook that can be used to ride the bags or control your rifle with your non-trigger hand. The MCS-T5 was designed around a Rem 700 style action, but can be had for Winchester, Savage, Howa and other actions. For a complete list please check out the order online/stock builder, or call for more details.

MCS-T4A AND T4

The MCS-T4 comes in two versions the T4A which has an adjustable cheek and the T4 with is non adjustable. The T4A comes standard with an adjustable cheek and KMW hardware. Both come standard with a fixed 1″ Pachmyer Decelerator pad. They can also be ordered with the optional butt spacer system and a 1/2″ Pachmyer Decelerator pad . The standard weight for the T4A is 4.2 lbs. And the T4 is 2.8 lbs.

The forend is about 2.50” wide and will take barrels up to 1.350 inches in diameter. The sides and bottom of the forend and the bottom of the butt behind the hook are parallel with the bore. This allows the stock to ride very straight and true if you want to use bags. The forend of the stock is only textured on the back half and we lengthened the pistol grip about 1/4″ longer compared to the T2 stock.

The MCS-T4 was designed around a Rem 700 style action, but can be had for Winchester, Savage, Howa and other actions. For a complete list please check out the order online/stock builder, or call for more details.

MCS-T3

This is one of our new designs. It is a good all around hunting / tactical stock. The standard weight is 2.6 lbs but can be had as light as 2.2 Lbs. The forend is 2.40” wide at the tip and will take straight taper barrels up to 1.350 inches in diameter..

The MCS-T3 comes standard with a 1″ Pachmyer Decelerator pad installed at a length of pull at 13.5″. This stock has a high cheek piece and a nice palm swell, and a little longer grip than the MCS-T stock.

The forend and palm swell feature a light molded in texture. The MCS-T3 was designed around a Rem 700 style action, but can be had for Winchester, Savage, Howa and other actions. For a complete list please check out the order online/stock builder, or call for more details.

MCS-T2A AND T2

This stock comes in two versions the T2A which has an adjustable cheek and the T2 that is non adjustable. The T2A comes standard with an adjustable cheek and KMW hardware. Both come standard with a fixed 1″ Pachmyer Decel pad. It can also be ordered with the optional butt spacer system and a Pachmyer Decelerator pad .

The standard weight for the T2A is 3.9 lbs. And the T2 is 2.6 lbs. The forend is 2.40” wide at the tip and will take barrels up to 1.350 inches in diameter. A lot of work went into the design of the back of the stock. It has a flat that is about 3/4″ wide on the bottom with true running sides. This allows the stock to ride very straight and true when using a rear bag. The MCS-T2 was designed around a Rem 700 style action, but can be had for Winchester, Savage, Howa and other actions.

For a complete list please check out the order online/stock builder, or call for more details.

MCS-T1

The standard weight is 3.4 lbs. But can be had as light as 2.4 lbs., and as heavy as 5 lbs. The forend is 1.78” wide at the tip and will take barrels up to 1.350 inches in diameter.

It comes standard with a high cheek piece and an adjustable spacer type butt system, with a 1/2″ Pachmyer Decelerator pad. It also has a butt hook that can be used to ride the bags or control the rifle with your non-trigger hand. Rem 700 s/a is the tandard inlet but others can be special ordered.

The MCS-T1 was designed around a Rem 700 style action, but can be had for Winchester, Savage, Howa and other actions. For a complete list please check out the order online/stock builder, or call for more details.

MCS-TA and T

This is our more traditional hunting / tactical stock. It comes in two different versions the MCS-T fixed cheek version and the MCS-TA adjustable cheek version with KMW hardware. The standard weight of the fixed cheek version is 2.5 lbs but with the 90% carbon fiber option it usually ends up around 2.1 lbs. The standard weight of the adjustable cheek version is 3.4 lbs.

The forend is 1.75 wide at the tip and rounded to a beaver tail that is flat. The forend is also wide enough to accept a #8 barrel which is about 1.125″ diameter at the tip of the stock. The MCS-T and TA comes standard with a 1″ Pachmyer Decelerator pad installed at a length of pull at 13.5″. This stock has a high cheek piece and a nice palm swell.

The forend and palm swell feature a molded in textured surface for a sure grip. The MCS-T was designed around a Rem 700 style action, but can be had for Winchester, Savage, Howa and other actions. For a complete list please check out the order online/stock builder, or call for more details.

MCS-GAT

This is a thumbhole tactical stock. This stock was a joint effort by MCS and GA Precision, to design a small light weight thumbhole tactical stock. The standard weight is 3.5 lbs but can be had as light as 2.8 lbs when ordered with the 90% shell option. The MCS-GAT is a ambidextrous stock with a small swell on both sides of the grip. The forend is 1.75 wide at the tip and rounded to a beaver tail that is flat.

The forend is also wide enough to accept a #7 barrel which is about 1.125″ diameter at the tip of the stock. It comes standard with a high cheek piece and an adjustable spacer type butt system, with a 1/2″ Pachmyer Decelerator pad. It also has a butt hook that can be used to ride the bags or control your rifle with your non-trigger hand. The MCS-GAT was designed around a Rem 700 style action, but can be had for Winchester, Savage, Howa and other actions. For a complete list please check out the order online/stock builder, or call for more details.

MCS-T50

This is our 50bmg thumbhole tactical stock. This stock was designed for the 1000 yard FCSA prone class. The T50 comes standard with a fixed 1″ Pachmyer Decelerator pad and a adjustable cheek with KMW hardware. It can also be ordered with the optional butt spacer system or a 4 way butt pad system. The cheek piece is designed for quick removal for cleaning, but at the same time giving the bolt plenty of clearance to operate.

The forend is longer than most 50bmg stocks for more stability, but not too long to affect the amount of swing on a close moving target. The standard weight is 5.5 lbs but can be had as light as 4.5 lbs. The MCS-T50 comes in right hand only, with a small swell on the left side for your thumb. The forend is 2.9″ wide at the tip and has straight vertical sides and a flat bottom. It also has a butt hook that can be used to ride the bags or controlling your rifle with your non-trigger hand.

This stock was designed for the big 50-bmg actions, call for more details.